RF lab hire
“ Quality equipment makes quality products ”
The lab hire service enables companies to have access to
RF test equipment, for times when hiring individual pieces of equipment may not be cost effective. Telestrian offers the 'test lab' rental service, with or without additional consultancy. This facility enables you to visit the Telestrian lab and use a full range of
RF design equipment.
Vector network analyser
- HP 8753E 6GHz vector network analyser, Hewlett Packard.
- Calibration kit 85052D, Hewlett Packard.
[ HP8753E, HP8753, HP 8753,
VNA,
NWA ]
Vector signal analysers
- HP 89441A vector signal analyser 2.6GHz, 89400 series, Hewlett Packard.
- E4406 vector signal analyser series transmitter tester 4GHz, Agilent.
[ HP89441A, HP89441, 89441, E4406,
VSA ]
Spectrum analysers
- FSIQ 3 spectrum / signal analyser 3.5GHz, Rohde & Schwarz.
- FSIQ 7 spectrum / signal analyser 7GHz, Rohde & Schwarz.
- FSIQ 26 spectrum / signal analyser 26.5GHz, Rohde & Schwarz.
These spectrum analysers also have vector signal analyser capability.
[ FSIQ3, FSIQ7, FSIQ26 ]
Signal generators
- E4437B ESG series, 4GHz vector signal generator low phase noise, Agilent.
- SMIQ 03B vector signal generator 3.3GHz, Rohde & Schwarz.
- SME 03 3.3GHz, Rohde & Schwarz.
- AMIQ 02 arbitrary I/Q modulation generator, Rohde & Schwarz.
- AMIQ 04 arbitrary I/Q modulation generator, Rohde & Schwarz.
[ E4437, SMIQ03B, SMIQ03, SME03, AMIQ02, AMIQ04 ]
Phase noise measurement system
- E5501B phase noise measurement system, E5500 series, Agilent.
- HP 70420A phase noise test set, Agilent.
- E4411B spectrum analyser, ESA-L series, Agilent.
- HP 8665B low phase noise signal generator 6GHz, Hewlett Packard.
[ E5501, E5501A, HP70420A, HP70420, 70420, HP8665B, HP8665, 8665
note: E5500 series includes the E5502, E5503, E5504, E5505. ]
Ancillary test equipment
- E4418B power meter EPM series, Agilent.
- HP 8481A power sensor, Hewlett Packard.
- HP 83480A digital communications analyser with HP 83483A 20GHz plug-in, Hewlett Packard.
- TDS 1002 DSO, Tektronix.
- 346B noise source, 18GHz 15 dB ENR, Agilent.
- AM503 Current probe amplifier with A6302 50MHz current probe, Tektronix.
- CTS 30 GSM tester, Rohde & Schwarz.
- MMT 1808 slide screw tuner for manual load pull, Focus microwave.
[ HP83480A, HP83483A, TDS1002, E4418, HP8481A, HP8481, 8481, 346, CTS30, MMT1808 ]
Reference antenna
- HyperLOG® 4040 400MHz to 4GHz, Aaronia.
- ETS 3117 1GHz to 18GHz, ETS Lindgren.
- STE 2800 shielded anechoic box 8GHz, Ramsey.
[ HyperLOG4040, ETS3117, STE2800 ]
All equipment has a GPIB interface, enabling computer control or custom ATE systems to be assembled and design verification testing to be undertaken.
To find out more about the capabilities of specific equipment or to discuss your particular requirement, please
contact Telestrian.